Product: DSL-504T ADSL Router Release version: V2.00B01T01.EU.20050930 Release date: 2005/09/30 : 1. Fix DMZ issue. 2. Fix IGMP package flood. 3. More than 15 rules in Advanced/Filter and Advanced/Bridge Filter. 4. Adjust parameters to avoid the lack of NAT sessions issue while using P2P. * Fix it can not add staic route rule into routing table after system save&reboot.(2005/06/30) <2005/06/09> 1.The default setting of VPI/VCI of PVC1~PVC7 is 0/0 2.When using PPPoE connection with manual ,there are some abnormal message in WAN setting. 3.PPP MTU:There is a difference between the default MTU configuration (1400) in the WAN section what is shown in the router logs: Sep 8 12:00:43> Default Asymmetric MTU for ppp0 1500. 4.Tools->Firmware: It doesn't check the invalid file when user uses the wrong file . 5.WAN->PPP mode->MTU : The message error happened when MTU field check it.it will show "MTU can't be less than 40" . But we input 80 value still occur it. 6.Advanced->DMZ: The DSL-504T's default lan ip address is 192.168.1.1 but the ip address of DMZ can be configured to ex 200.1.1.2(not same network as LAN IP). (1)Default settings Modulation Type: Multi-mode connection1: PPPoE LLC VPI/VCI : 8/35 User name : admin Password : admin IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 (2)ATM Driver 4.03.03.00 DSL HAL 3.02.00.03 DSL Datapumps 3.02.06.00 Annex A