DSR500N-LED-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY, 
        NOTIFICATION-TYPE, OBJECT-TYPE 
                FROM SNMPv2-SMI
        DisplayString
                FROM SNMPv2-TC
        dsr500n 
                FROM DSR500N-MIB;

dsr500nLedModule MODULE-IDENTITY
   LAST-UPDATED "201101020700Z"       -- 1st February 2011
   ORGANIZATION "Dlink"
   CONTACT-INFO "
   Email: 
   "
   DESCRIPTION
   "
    MIB module for reading status of different LED's and 
    port speed/link status of every ethernet port.
   "
   REVISION "201101020700Z"       -- 1st February 2011
   DESCRIPTION " Initial version"
   ::= { dsr500n 1 }

systemLed OBJECT-TYPE
  SYNTAX  INTEGER (0..3) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The state of System LED
          0 - Led is Off
          1 - Led is On
          2 - Error"
  ::= {dsr500nLedModule 1}

wifi24Led OBJECT-TYPE
  SYNTAX  INTEGER (0..2) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The state of Wireless 2.4 Ghz LED
          0 - Led is Off
          1 - Led is On
          2 - Error"
  ::= {dsr500nLedModule 2}

wpsLed OBJECT-TYPE
  SYNTAX  INTEGER (0..3) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The state of WPS LED
          0 - Led is Off
          1 - Led is On
          2 - Led is Blinking
          3 - Error"
  ::= {dsr500nLedModule 3}

usb1Led OBJECT-TYPE
  SYNTAX  INTEGER (0..2) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The state of USB1 LED
          0 - Led is Off
          1 - Led is On
          2 - Error"
  ::= {dsr500nLedModule 4}

lan1Status OBJECT-TYPE
  SYNTAX  INTEGER (0..100) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The link state of LAN PORT 1 and the Port Speed.
           A two digit integer will be returned. The first digit
           will show the link activity as the following:
          1 - Link Down
          2 - Link Up
          3 - Error

          The second digit will show the port speed
          0 - 10   Mbps
          1 - 100  Mbps
          2 - 1000 Mbps
          3 - Error
          So a value of 21 will mean Link is Up and Port speed is
          100 Mbps"
  ::= {dsr500nLedModule 5}

lan2Status OBJECT-TYPE
  SYNTAX  INTEGER (0..100) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The link state of LAN PORT 2 and the Port Speed.
           A two digit integer will be returned. The first digit
           will show the link activity as the following:
          1 - Link Down
          2 - Link Up
          3 - Error

          The second digit will show the port speed
          0 - 10   Mbps
          1 - 100  Mbps
          2 - 1000 Mbps
          3 - Error
          So a value of 21 will mean Link is Up and Port speed is
          100 Mbps"
  ::= {dsr500nLedModule 6}

lan3Status OBJECT-TYPE
  SYNTAX  INTEGER (0..100) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The link state of LAN PORT 3 and the Port Speed.
           A two digit integer will be returned. The first digit
           will show the link activity as the following:
          1 - Link Down
          2 - Link Up
          3 - Error

          The second digit will show the port speed
          0 - 10   Mbps
          1 - 100  Mbps
          2 - 1000 Mbps
          3 - Error
          So a value of 21 will mean Link is Up and Port speed is
          100 Mbps"
  ::= {dsr500nLedModule 7}

lan4Status OBJECT-TYPE
  SYNTAX  INTEGER (0..100) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The link state of LAN PORT 4 and the Port Speed.
           A two digit integer will be returned. The first digit
           will show the link activity as the following:
          1 - Link Down
          2 - Link Up
          3 - Error

          The second digit will show the port speed
          0 - 10   Mbps
          1 - 100  Mbps
          2 - 1000 Mbps
          3 - Error
          So a value of 21 will mean Link is Up and Port speed is
          100 Mbps"
  ::= {dsr500nLedModule 8}

wan1Status OBJECT-TYPE
  SYNTAX  INTEGER (0..100) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The link state of WAN1 and the Port Speed.
           A two digit integer will be returned. The first digit
           will show the link activity as the following:
          1 - Link Down
          2 - Link Up
          3 - Error

          The second digit will show the port speed
          0 - 10   Mbps
          1 - 100  Mbps
          2 - 1000 Mbps
          3 - Error
          So a value of 21 will mean Link is Up and Port speed is
          100 Mbps"
  ::= {dsr500nLedModule 9}

wan2Status OBJECT-TYPE
  SYNTAX  INTEGER (0..100) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The link state of WAN2 and the Port Speed.
           A two digit integer will be returned. The first digit
           will show the link activity as the following:
          1 - Link Down
          2 - Link Up
          3 - Error

          The second digit will show the port speed
          0 - 10   Mbps
          1 - 100  Mbps
          2 - 1000 Mbps
          3 - Error
          So a value of 21 will mean Link is Up and Port speed is
          100 Mbps"
  ::= {dsr500nLedModule 10}


END